3D AEROWORKS TRACER 2000 Montagehandleiding en gebruikershandleiding - Pagina 13

Blader online of download pdf Montagehandleiding en gebruikershandleiding voor {categorie_naam} 3D AEROWORKS TRACER 2000. 3D AEROWORKS TRACER 2000 19 pagina's. Thermal glider

Pagina afdrukken
8
Install the motor and esc. Depending on the motor, the shaft position may need to be
adjusted. Be careful not to bend the shaft if this is required!
9
Fit the propeller blades to the hub and secure the hub to the motor.
The spinner is designed with an m6 thread and will screw on to most 28 sized motor
adapters.