AERF Wirelessband 3.0 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AERF Wirelessband 3.0. AERF Wirelessband 3.0 2 pagina's.
Ook voor AERF Wirelessband 3.0: Gebruiksaanwijzing (2 pagina's)
Pagina afdrukken
EN
5. START-UP
+
12/24V
2. CONNECT RECEIVER
1. INSERT BATTERY
>1m
RECEIVER
TRANSMITTER
6. MINIMUM DISTANCE
7. MAXIMUM DISTANCE
1 m.
MAGNET - TRANSMITTER
1cm.
6. PROGRAMMING PROCESS
CODE MEMORIZATION
1.5s
PROG.
PRESS
1 X BEEP
RECEIVER
MEMORY RESET
1.5s
PROG.
1 X BEEP
PRESS
RECEIVER
MEMORY FULL INDICATOR
Several beeps for 10 seconds when trying to memorize a new transmitter.
LOW BATTERY INDICATOR
4 beeps each time a message is received from a programmed transmitter. Both, warning LED and buzzer are activated simultaneously.
TECHNICAL SPECIFICATIONS
Receiver suply voltatge
Transmitter suply voltatge
Receiver Output
Receiver Power consumption
Battery life
Ball pressure test (IEC 695-10-2)
Pollution degree
Protection class (IEC 60529)
Frecuency Channels
Range
Working temperature
Rated transient over voltage
Transmitter power consumption
Reaction time
CE DECLARATION OF CONFORMITY
For more information visit the website www.aerf.eu
WIRELESSBAND 3.0
All manuals and user guides at all-guides.com
-
+
0V
AC/DC
3. CHECK OPTION
POWER SUPPLY
SELECTORS
M
<1cm
8. INSTALL AND WIRE
RECEIVER
PROG.
RELEASE
PRESS
TRANSMITTER
BUTTON
3s
PROG.
KEEP IT
PRESSED
12/24 AC/DC
2x lithium battery 3V DC type CR2032
2 Relay free voltage
0.5 W - 12 V / 1,2 W - 24 V
4 years
PCB (125ºC) WRAP (75ºC)
2
Ip55
868.95MHz & 869.85MHz
100m
-35ºC to +55ºC
330V
Transmitting 17mA / stand by 16uA
60 ms.
4. CARRY OUT CODE
MEMORIZATION (POINT 4.)
12/24V
220V
CONTROL
UNIT
ON
9. TURN ON POWER
SUPPLY
10s
1 X BEEP
WAIT
# BEEPS
RELEASE
WARNING!!
- Installation, start-up, modification and updating of the
system may only be carried out by a qualified person.
-
Switch off the operating voltage before working on the system.
- The system doesn't have fuse protection. It is recommended
include exterior protection from 100mA to 250mA.
- In case of any hypothetical issue, please do a memory reset
(point 6.).
PROG.
5. INSTALL TRANSMITTER
OK?
10. CHECK THE SAFETY
CONTACT
2 X BEEP
SAVE & EXIT
10s
PROG.
2 X BEEP
WAIT
SAVE & EXIT
2 - 2