Arometrix Extraction Finder Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Arometrix Extraction Finder. Arometrix Extraction Finder 20 pagina's.
Ook voor Arometrix Extraction Finder: Gebruikershandleiding (14 pagina's), Snelstarthandleiding (2 pagina's)
Pagina afdrukken
F. Reference Peak Remover: Removes the internal reference/excitation peak from Spectrum view
G. Auto-Zoom: Returns zoom view to normal. You can zoom with 1 finger by drawing a bounding box.
H. Home: Returns you to the Home if you are in Settings
I.
Settings: Allows you to adjust settings, such as Auto Integration Time, Scans to Average, and the
Wavelength Tracker
J.
Region 1-3 Checkboxes: For Wavelength View - By checking this box, it will populate the
Wavelength plot with the corresponding molecule tracking. For Spectrum View - By checking this
box, it will highlight the Spectrum plot with the region that molecule fluoresces at. For Wavelength
View - By checking this box, a color-coordinated line will track the molecules' intensity levels.
K. Region 2 Checkbox: See I.
L. Region 3 Checkbox: See I.
The following information is for the 2022 models and later:
M. Region 1-3 Checkboxes: For Wavelength View - These will automatically be checked and applied to
the Wavelength plot
N. Light on/off: Turns the light on. This toggles between states.
O. Record on/off: Turns the recording mode on. This toggles between states.
Settings Tutorial
When you tap the Settings button, you will see:
● Wavelength Settings
● Set Integration Time
● Set Scans to Average
● Clock Settings
● System Data
Wavelength Settings
In this tab, you will see:
● Edit Wavelength 1
● Edit Wavelength 2
● Edit Wavelength 3
These correspond with the Region 1, Region 2, and Region 3 that are shown on the plots. When you press
one of these, you will see a Wavelength range. These will come preset with manufacturer's defaults;
however, you can edit the From and To how you see fit. See below.
Arometrix, Inc.
arometrix.com/resources
15