Altrex MiTower Veiligheids- en montagehandleiding - Pagina 7
Blader online of download pdf Veiligheids- en montagehandleiding voor {categorie_naam} Altrex MiTower. Altrex MiTower 20 pagina's.
Pagina afdrukken
9. Ballast
Ballast is not required for indoor and outdoor usage up to a maximum wind speed of 18 miles per hour. Please
contact your Altrex dealer with regard to use in higher wind speeds.
10. Moving the scaffold
The scaffold may only be moved while observing the following conditions:
1.
When the scaffold is moved, persons and/or materials may not remain on the mobile unit.
2.
Beforehand, checks should be made that the environmental factors, such as swinging doors, canopies, pits,
automatically functioning awnings, aboveground electrical cables, traffic and/or passers-by, etc. do not lead to dangerous
situations while the scaffold is moved.
3.
In order to move the scaffold, the stabilizers can only be raised to a maximum of 0.5 inch.
4.
Only move the scaffold manually in a lengthwise direction, over a flat, horizontal and sufficiently load-bearing surface.
5.
Manual force used to move the scaffold shall be applied as close to the base as practicable, but not more than 5 feet
above the supporting surface.
6.
After moving the scaffold has to be realigned horizontally using a spirit level.
7.
Check that the environmental factors, such as swinging doors ,awnings that operate automatically, aboveground
electrical cables, traffic and/or passers-by, etc., do not lead to dangerous situations.
8.
Check that the scaffold can be used safely and that it is suitable for the intended purpose.
9.
WARNING: moving the scaffold as described in this chapter does not apply for the MiTOWER STAIRS. To move these
scaffolds, they have to be disassembled first.
11. Disassembly of the scaffold
The scaffold should be disassembled following the instructions for assembly but in reverse order.
12. Inspection, Care and Maintenance
1. Scaffold parts must be handled and transported with care in order to avoid damage.
2. Storage should be organized in such a way that only undamaged parts, in the correct amounts, are available for assembly of the
scaffold.
3. Check all moving parts for correct functioning and check that these are not filthy.
4. Check all parts for damage. Damaged, worn-out or incorrect parts may not be used. Replace these parts only with original Altrex
parts.
5.
Any scaffold components damaged or weakened from any cause shall be immediately removed from service and shall not be
used until repairs have been completed and approved by a qualified person.
6. To prevent accidents, these parts must be mounted in the same way as the part that is replaced. Mounting (fastening) and/or
repair are at your own expense and risk. Altrex shall not be liable for damage resulting from erroneous mounting and/or repair.
7. Scaffolds must be inspected periodically by an expert.
13. Warranty conditions
Please visit www.altrex.com/warranty to view the clauses of the Altrex warranty.
14. Abbreviations and logos
Abbreviation / logo
lb. / lbs.
lb.
L
W
Optional
Indoor use
Outdoor use
Wood
Fiber-Deck®
All rights reserved. No part of this publication may be duplicated, stored in an automated database, or disclosed in any way
or manner, whether electronically, mechanically by photocopying, recording, or in any other way, without prior permission of
Altrex BV Zwolle. This publication may only be used for Altrex products. Misprints and printing errors reserved.
Meaning
Working height
Platform height
Pounds
Length
Width
Optional use
Indoor use
Outdoor use
Wood
Fiber-Deck® light-weight platforms (Optional)
3
www.altrex.com
7