Altron TROVE Trove2HR2R Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Altron TROVE Trove2HR2R. Altron TROVE Trove2HR2R 8 pagina's. Trove rack enclosure with altronix and identiv backplane

Pagina afdrukken
Configuration of Altronix Power Supply and/or Sub-Assembly Boards and Identiv Boards
1. Fasten spacers onto metal pems configuration of backplane depending on the board (Fig. 6, pg. 5).
2. Position module over corresponding spacers and fasten screws into spacers (Fig. 6a, 6b, pg. 5).
3. Mount backplane to enclosure with hardware.
Position Chart for the Following Models:
Altronix / Identiv
eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB,
AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2
LINQ8ACM(CB), ACMS8(CB), ACM8(CB)
LINQ8PD(CB), ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6
LINQ8PD(CB), PDS8(CB), VR6
RREB, AEB8 and REB8
Mx2, Mx4, and Mx8 with CCMx and SNIB3
Fig. 6
A
B
C
D
Fig. 6a
Pan Head Screw
Power Supply
or
Sub-Assembly
Backplane
Spacer
Pem
Trove2HR2R Installation Guide
THR2R:
A
E
E
Fig. 6b
Pan Head Screw
Identiv Board
Backplane
Spacer
Pem
Pem Mounting
Door 1
Door 2
HIRSCH Mx
026-XXXXXXX REV
© 2013 IDENTIVE GROUP
ON
P1
P2
P3
F
CCMx
026-XXXXXXX REV
© 2013 IDENTIVE GROUP
F10
F9
24V
Battery
28VDC
A
B
C
D
E
F
ON
SW 1
TAMPER
- 5 -