Altronics S 9414A Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Altronics S 9414A. Altronics S 9414A 8 pagina's. Video door intercom

Pagina afdrukken

VIDEO DOOR INTERCOM SYSTEM

Included in the box:

• Indoor base station x 1

• Outdoor camera x 1

• Indoor handset x 1

• Expansion junction box x 1

• Mounting bracket x 1

• Mounting screws (4Gx18mm) x 2

• Monitor fixing screws (M3x10mm) x 1

• Power supply

Overview

This system consists of a weatherproof black and white camera module with microphone and a base sta-

tion with handset and screen. Automatically activates the camera and inside display screen when the

"call" button is pushed by a visitor. You may talk to your visitors using the handset on the base unit. The

system can be expanded with up to 4 base stations, enabling the intercom to be answered at different loca-

tions within the home. You can even communicate between indoor stations (ie: as an internal home inter-

com). For homes with multiple entrances a second outdoor camera unit is available separately. Output

contacts for an optional door strike are inbuilt activated by a button on the base unit.

Features

• Weatherproof B&W camera pin hole camera, looks just like a normal door bell

• 4" monitor

• 4 wire connection

• Normally open output for operating door strike relay

• 240V mains operation (power supply included)

• Panic button & output contacts

• Up to 4 indoor base units

• Up to 2 outdoor camera units

Installation

1. Determine the mounting locations for both outdoor camera and base station. To ensure people are

within view when the camera is mounted, bear in mind the camera's 55 degree viewing angle. Typical

wall mounting height 1450mm. Ensure you are satisfied with the viewing position of the camera and

base station before drilling any holes in your wall.

2. At the selected base station mounting location, attach the mounting bracket to the wall securely. In the

centre of the bracket, drill a hole for the electrical and camera signal wiring.

3. Connect the wiring between the base station and camera as per figure 3.

4. Connect the handset to the indoor base station.

5. Slide the base station down against the mounting bracket until the hooks on the bracket secure the unit

in place. Use the small machine screw provided to secure the unit on the wall using the screw hole on

the top of the mounting bracket.

6. Switch on AC power to the unit.

7. Switch on the base station (see figure 1 for location of on/off switch.)

Important mounting guidelines: Do not install the monitor and camera units where they will be exposed

to dirt, moisture, excessive humidity, temperature (+40°C) or constant direct sunlight. Do not select a loca-

tion where it will be exposed to vibration. Select a location close to an AC power outlet where it is easy to

view the screen and operate the monitor.

Installation With Two Indoor Base Stations

Follow the wiring diagram shown in figure 4. The second base station simply connects into the first base

station via the additional 4 way header terminal.

Page 2