DJM Suspension ASB2599F Installatie-instructies
Blader online of download pdf Installatie-instructies voor {categorie_naam} DJM Suspension ASB2599F. DJM Suspension ASB2599F 2 pagina's. For chevrolet 1500 2wd
Pagina afdrukkenASB2599F
Chevrolet 1500 2wd 99-06
INSTALLATION INSTRUCTIONS
NOTE: Products should only be installed by a qualified licensed
mechanic experienced in the installation and removal of suspension
components. Please read instructions from start to finish and verify
the parts in the parts list before beginning installation.
What's Included:
Front anti-sway bar - 1
Pivot Bushings - 2
Tube of Lube - 1
1. Park vehicle on a smooth, level, asphalt or concrete surface. Block rear wheels. Jack
up front end of car and support frame with jack stands. Remove front wheels and tires.
2. Locate and remove the nuts that attach the ends of the OEM anti-sway bar to the end
links. Remove the end links from the lower control arms. Make note of the orientation
of the end link as the new bar will be installed in the similar manner. Remove the bolts
that attach the bar mounting brackets to the frame, and remove the OEM anti-sway
bar from the vehicle.
3. Liberally grease the inner bore of the new polyurethane bushings with lubricant
provided, place the bushings over the new anti-sway bar in the same locations as the
OE configuration. Install the front anti-sway bar using factory hardware and brackets.
Torque mounting bolts to 30-34 ft.-lbs
4. Install the OE bolts, end link grommets, cup washers, and nuts on the bars in the OE
orientation. Torque end link to 30-34 ft/lbs.