d&b audiotechnik Q Series Rigging handleiding - Pagina 13
Blader online of download pdf Rigging handleiding voor {categorie_naam} d&b audiotechnik Q Series. d&b audiotechnik Q Series 18 pagina's. Flying frame, flying adapter
Pagina afdrukken
WARNING!
[R4]
[CR]
[R2]
Fig. 30: Sockets for secondary safety
Q-Series Rigging manual
4.2.
Secondary safety at Z5156 Q Flying adapter
Do not connect the secondary safety to the centre socket
[CR] (Fig. 30) at the back of the cabinet. This socket is
intended for horizontal aiming of an array and limited to a
load of 50 kg (110 lb).
The secondary safety should be applied to the top cabinet of the array.
Use two Z5048 Flying pins 10 mm connected to the sockets [R2] at the
rear of the cabinet or two Q9032 M10 Safety eye bolts attached to the
threaded inserts [R4] on both sides of the cabinet, passing the steel rope
through the Flying pins or the Safety eye bolts and attaching it to the
securing pickup point.
(1.2EN)
Page 13 of 20