Asko T720 Gebruiks- en onderhoudshandleiding - Pagina 9
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Asko T720. Asko T720 16 pagina's. User manual use & care guide t760-t780 (use & care guide - en, fr)
Ook voor Asko T720: Snelstarthandleiding (2 pagina's), Installatie (1 pagina's)
Pagina afdrukken
The Delayed Start Program
This program lets you delay starting the dryer for up to
12 hours. This feature is useful in areas where utility
companies offer discount rates during certain hours.
When you select Delayed Start on the program menu,
you must select a delay time (1 to 12 hours).
Select time
for delayed start
<
Next
>
P1
M e n u
1. In the bottom right corner of the LED window, a
clockface and a zero will flash. To change the zero,
simply press an Arrow button until the number of
hours you want to delay starting the program displays
(1–12 hours).
2. Press ENTER to program your change.
Press MENU to advance to the next menu or press
START to begin the program. When you press START,
the clockface and the hours you set for the delay will
display, as illustrated below:
Extra dry
Anti-Crease 1h
Temperature normal
P1
M e n u
RESTORING A PRESET
RESTORING A PRESET
PROGRAM
PROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you want
to restore and hold it down while your press ENTER.
The program will revert to its original settings.
ERROR MESSA
ERR
OR MESSAGES –
Error messages will display in the LED window if a
fault occurs while a program is in progress. The table
below defines each possible error message. If the
ERROR MESSAGE
Three hours
Overflow (T780)
Sensor
Thermistor
0
E n t e r
9
E n t e r
GES – T760/T780
T760/T780
SOLUTION
Make sure both fuses are intact.
Clean the lint filter.
Make sure exhaust hose is clear (T760).
Clear message by turning the power off then on.
Make sure the condensed water container is empty. If draining into a drain pipe,
make sure the black rubber hose is not kinked or blocked. The drain should not be
higher than 40 inches from the floor.
Make sure the condensation pump is not blocked.
This can appear if there are dry clothes in the drum when the unit is started. Cancel
the error message by opening the door or turning the power off then on.
Call a service technician.
CHANGING THE LANGU
CHANGING
THE LANGUA A GE
ON
ON THE LED DISPLA
THE LED DISPLAY Y
There are eleven languages available for the LED
window:
English
French
Spanish
Portuguese
Italian
German
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER
ENTER five times in succession then press
P1 five times. (This must be done within 15 seconds.)
3. When the Language menu displays, press an Arrow
button to advance through the menu to the desired
language.
4. Once the correct language displays, press ENTER
to program the LED window to display the language
you selected.
CHILD-SAFE ST
CHILD-SAFE STAR
ART T
As a safety measure, you can program the T760 and
T780 not to start unless the Start button is held down
for three seconds. To do this, follow the steps below:
1. Turn the machine off then on.
2. Press ENTER five times, then press P3 five times.
(This must be done within 15 seconds.)
3. "Delayed start" displays with "0" flashing in the lower
right corner. Press the right Arrow button to toggle
the display to "3."
Child-Safe Menu Button
Please note that when you set the child-safe Start button,
the Menu button is automatically programmed to delay
for three seconds before it becomes active. This
prevents a child from accidentally changing the program
settings.
When you want to change a program, press the Menu
button for three seconds to activate the menus. The
Menu button will work normally (without the 3-second
delay) until you have completed your changes. If it is not
pressed for two minutes, it will automatically revert back
to the child-safe mode.
message still displays after you have checked the
possible solutions, call a service technician.
GE
Swedish
Danish
Norwegian
Netherlands
Finnish
Page 9