Asko TD70 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Asko TD70. Asko TD70 16 pagina's. Tumble dryers

Filter clogged

The overheating cutout (150°C) will operate, and the machine stops.Must be reset

manually.

Moisture sensor not installed in the fan casing or fault in the control unit

The machine stops after ca 20 min.

Incoming suppIy fuses blown

Fuse L1 blown: Machine will stop after ca. 20 minutes. Heater power will be reduced

(950W)

Fuse L2 blown:The machine will not start. Main power On light extinguished.

Fuse L3 blown: Machine operates, but with extended running time (low heater power

1900W).

380V between phase and neutral

The fan motor will stop after a few seconds. The overheating cutout will operate, but

the heater and controls will be destroyed.

TD 77