AME 15925 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe AME 15925. AME 15925 5 stron. 5qt. air pump w/ plastic reservoir
Drukuj stronęTROUBLE SHOOTING
Symptom
Application will not extend, move
or respond to pressurized fluid
Application responds to
pressurized fluid, but system
does not maintain pressure
Application will not return fluid to
pump (ie. Cylinder will not
retract)
Application will not fully extend
(cylinder or spreader)
Poor Performance
Possible Causes
Overload Condition
Release Valve not
closed
Overload Condition
Release Valve not
closed
Hydraulic unit
malfunction
Malfunctioning coupler, Secure load by other means. Open
damaged application
Reservoir overfilled
Fluid level low
Fluid level low
Air trapped in System Ensure proper fluid level
AME International
2347 Circuit Way
Brooksville, Fl 34604
(877)775-4263
www.ameintl.net
Corrective Action
Remedy overload Condition
Ensure release valve closed
Remedy overload Condition
Ensure release valve closed
release valve, depressurize pump and
hose, remove coupler and/or
application, then renew or replace
Secure load by other means. Open
release valve, depressurize pump and
hose, remove application, then drain
fluid to proper level
Follow Symptom 3 procedure for
securing load, depressurizing pump,
remove application, then ensure proper
fluid level
Ensure vented oil filler plug let
pressurized reservoir air escape (see
before use)