Acer AL2016WBsd Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Monitor Acer AL2016WBsd. Acer AL2016WBsd 11 stron. 20-inch flat panel active-matrix tft lcd

(1)

Power Cord

(2)

VGA Cable

WARNING:

The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches

the shape of the socket it is inserted into, and tha t none of the pins are bent or otherwise damaged.

Operating Your Monitor

First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on

the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video

signal to appear. If you do not see the green light on the power button or a video signal, check the connections .

Auto

Please refer to "External Controls " on Page 5. To adjust the OSD settings :

1. Press the MENU button to open the OSD menu .

2. Use the buttons marked < or >, to highlight a control, then press the MENU button to enter

3. Use the buttons marked < or >, to adjust the control to the desired level.

4. When you have finished making all selections, press the MENU button to exit the O S D. (Or the adjustment

will auto-save a fter 45 seconds.)

Attach the monitor to the power cord which should then be

inserted into a properly grounded electric socket.

Connect the signal cable to the VGA output socket of the graphics card

on the computer. Then tighten the thumbscrews on the connector

If OSD is active, press to exit. If OSD is inactive, press and the

monitor will automatically optimize the display position, clock and

Auto Configuration

phase of your display.

If OSD is active, press to select or adjust OSD options.

Minus

If OSD is active, press to select or adjust OSD options.

Plus

Press to view OSD. Press again to exit.

OSD Manual

Power on/off

Green: power on

Power

Orange: in sleep mode