Aktobis WDH-SA6501 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Nawilżanie Aktobis WDH-SA6501. Aktobis WDH-SA6501 10 stron.

Before use

Carefully remove the humidifier from its packaging box and remove all protective

packaging. Place the humidifier on a firm, level surface that provides sufficient space

for the unit and the user. Give the humidifier about half an hour (to adjust to the room

climate) before operating it for the first time.

Commissioning

2.1. Remove the water tank by pulling straight up on the handle. Unscrew the twist cap of

the water tank and fill it with clean and clear water. Then put it back in place, making

sure that the water tank is correctly seated and that the water can drain easily into the

collection basin.

Note: Always use only water with a temperature below 40°C !

Wait briefly for a minute so that the water can distribute well in the lower part of the

humidifier.

2.2. Plug the mains plug of the appliance into a mains socket.

2.3. Now turn the operating switch to the right to start humidification operation.

OFF

= OFF

HIGH

= Full operating level

LOW

= Low operating level

2.4. Turn the operating switch completely to the left again (OFF) to end humidification

operation.

Cleaning & Storage

3.1 Preparation for cleaning



Please switch off the appliance first and disconnect the mains plug before cleaning the

humidifier.



Remove the water tank and the fan housing by pulling them both vertically upwards

and thus detaching them from the base plate.



Now unscrew the water tank and empty it and the collection basin completely of any

residual water.

Instructions for use

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de