Air & Allied Sales MP-35A Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia Air & Allied Sales MP-35A. Air & Allied Sales MP-35A 11 stron. Air nippers
Drukuj stronę＜Under work ＞
Intercept an air source of supply at any cost at the time of air hose desorption.
①Use the appointed air pressure power.
･The use air pressure power range of this machine is 0.5 - 0.6MPa. Use it within the limits of this.
If it is used by the air pressure power beyond 0.6MPa, there will be a burst of the body and
fear of damage and it will become a cause of an injury.
②During use, do not turn tip parts, such as blade, to an operator or other persons,
or bring neither a hand nor a face close.
･It becomes a cause of an injury.
③Do not use it in a place with an inflammable liquid or gas.
･Do not use this machine in a place with the existing inflammable liquid or gas, such as thinner, gasoline, a paint,
and gas. Suction compression is carried out together with air, there is fear of explosion or a fire, and it becomes
a cause of an accident. It is not designed in the purpose of use in explosive environment.
④Do not touch blade other than the time of blade exchange and trouble generating.
･Since each air nipper and air scissors have powerful cutting power (sticking-by-pressure power),
do not touch blade or do not bring fingers around blade close.
⑤In the following case, please remove an air hose and extract compressed air.
(There is a possibility that the stored air may cause danger.)
･It is after use at the case where it is not used, or the time of work discontinuation.
･In the cases of check, repair, adjustment, etc.
･When the accessories at the time of blade exchange, etc. are exchanged.
･When moving an air nipper and delivering by hand.
The air nipper operates accidentally and it becomes a cause of an injury.
⑥Do not let me desorb an air hose, where a finger is applied to a lever.
･The air nipper operates accidentally and it becomes a cause of an injury.
⑦A workpiece should work fixing firmly.
⑧Be careful of a surrounding person during work.
・Since cutting has a possibility that scraps etc. may hit in use, do not let an outsider enter within a 1-m radius.
It causes the injury.
･Be sure to confirm well that there are no people, and to use a fall prevention implement downward,
at the time of height work, to equip it with it.
It becomes a cause of an accident when this machine and material are dropped.
⑨In the work to a weak material, cause a harmful fragment and be careful.
･Be careful of working leaning the head etc. in the work which discharge of a facet etc. generates.
⑩Hold an air nipper certainly during use not to be rejected about.
･It will become a cause of an injury if it does not hold certainly.
⑪Do not work with an impossible posture.
･Always brace a step and maintain balance.
⑫Work being careful enough without being inattentive.
･When you use an air nipper, be careful of the handling method, the method of work, a surrounding situation, etc.
enough, and work carefully.
・The untidy place causes an accident.
・ Make the workplace bright enough. Work at a dark place becomes a cause of the accident.
･Do not use it, when you are tired.
⑬Perform the handling of a product carefully.
・Please never raise and lower,carrying the product by using the air hose.
・Please note that the air hose has the possibility of the whip.
⑭Keep in mind that this air nippers are not insulated for contact with the electric power source.
⑮When you drop accidentally or you throw, check well that there are not breakage,
a crack, and modification in the body etc.
･There is fear of a burst by internal compressed air, and it becomes a cause of an injury.
⑯During use, when the body is out of condition or you feel abnormalities,
stop use immediately and request repair from the store or the Muromoto ironworker of a purchase.
⑰Never do the non load operation.
・The operation without load causes the damage of the cutting portion.
2/11
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au