Akura APL2YR2668FD2U Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla TELEWIZOR LCD Akura APL2YR2668FD2U. Akura APL2YR2668FD2U 2 stron.

Drukuj stronę

GETTING STARTED

Please read the safety section (page 2) in the main instructions before proceeding further. This section

contains vital information to ensure safe positioning and use of the TV

Unpack the TV and place on a flat level surface suitable to support the weight of the TV (9.43 kg .). This will require

two persons to lift the TV safely.

Connect the aerial into the TV Tuner connector at the rear of the TV (Fig 3).

Fig 1

Connect the mains power lead to the mains socket at the rear left side of the TV. (Fig

2 ) Plug in and switch on the TV with the Power Switch at the mains. The LED

indicator on the TV will illuminate and show red (Fig 1).

Open the battery compartment cover (Fig 4) on the reverse of the remote control.

Insert 2 x AAA 1.5V alkaline batteries in accordance with the diagram in the battery

compartment. Take care to observe the correct polarity (+/-). Refit the battery

compartment cover

Press the POWER button (Fig 5) to turn the TV set on. The LED indicator will turn

green and after a few seconds, the screen will activate and the first time installation

menu (Fig. 6) will appear.

Use the cursor ▼/▲ buttons on the remote control to move up and down the display

to highlight desired options.

The default language is "English" if you want another language select that language

using the ►/◄ buttons and press OK.

Select AUTOTUNING and press OK. Fig 7 will be displayed, using the ▲/▼ buttons

select to country of use (UK is default). Select START and press OK, the TV will now

search the entire UHF range for both digital and Analog TV stations. See Fig 8. When

search is complete the TV will display the first channel (BBC1) in DVBt mode.

WATCHING TV (basic operation)

10.

To select a channel either enter the number of the channel using the number

buttons on the remote control or scroll through the channels using the channel

CH+/- buttons.

11.

To view analogue TV channels press the SOURCE button to display the source

menu. Using the cursor ▲ / ▼ buttons highlight TV on the menu and press OK to

select. To view digital TV channels select DTV on this same menu.

12.

To check the list of channels stored, press the CH.LIST button to display the

channel list and use the cursor ▲ / ▼ buttons to move up and down the display.

To select a channel, highlight the channel on the list and press OK to confirm.

13.

Adjust the volume to the desired level using the volume or cursor ◄ / ►buttons.

The sound can be silenced by pressing the MUTE button on the remote control

and a mute symbol will appear on the screen. Press the MUTE button a second

time to restore the sound.

14.

To switch off the TV for short periods, press the POWER button. The TV will go

into standby mode and the LED indicator will change to red. If not using the TV

for extended periods turn off at the mains switch to conserve electricity, all

settings will be retained.

Although the Flat screen is made with high precision technology and 99.9% or more of the

pixels are effective, dots may appear. These can be black or bright dots (red, green or blue)

and may appear constantly on the Flat screen. This is a structural property of the Flat panel

and is not a malfunction.

APL2YR2668FD2U

Quick Start Guide

Fig.2

Flat Screen

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8