Akurat lighting hp3a Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt oświetleniowy Akurat lighting hp3a. Akurat lighting hp3a 2 stron.

l Power supply

The hp3a was designed to be powered from any of DC 6-20V/16W sources. The unit can easily be supplied from: (in example)

camera socket via D-Tap connector (if the camera is equipped with a such slot)

popular different brands camcorder batteries, using DVB-02 adapter mounted to the lamp housing (optional)

vehicles electrical systems (6 or 12V)

AC power adapters

Find the proper cable or adapter in the " Accessories" bookmark, at the product site (www.akuratlighting.com) , to configure your

own supply option.

Check both, the voltage and the polarity, before connecting the light to the power source. Plus (+) of power source must be

connected to the middle pin of the hp3a power socket, a minus (-) to the concentric outer electrode. The light is equipped with

protection against damage as a result of attempts to supply the source of the reverse polarity, and in the case such a connection

the unit just will not work.

l Warranty and Service

The warranty period lasts 36 months from the date of sale. The warranty includes free removal of defects revealed during the

operation under the conditions specified in this warranty card. To take advantage of the warranty, it is necessary that the following

conditions:

installation and operation of the equipment should be in accordance with this instruction

seal on the housing shall not be infringed

there aren't any corrections and amendments in the warranty card

WARRANTY DOES NOT COVER:

damages caused by improper transportation or storage

damages resulting from improper installation or operation, including mechanical damages of the light

damages resulting from handling inside the unit, construction changes, alterations and repairs to be carried out without the

consent of the manufacturer

In the case of defect covered by warranty, please contact your local dealer or send the unit at own expense to the manufacturer,

together with: this warranty card, description of damage, contact details, and the return address.

An employee of the manufacturer shall make an initial review of the device. The guarantor will contact with the person who

notified a defect, to take action to payable repair, in the case of detect described above events of the loss of the guarantees, or

detect of damages whom the warranty does not cover,. the guarantor has the right to charge a fee for checking the equipment in

the amount of 15 € plus the cost of return shipping, if there is no agreement to payable repair or in the event of unjustified

complaints, In other cases, the fault will be removed free of charge, or equipment will be replaced. The new or repaired equipment

will be sent at the expense of guarantor for the applicant address within 14 days from the date of delivery for repair. After the

warranty expired, the guarantor will provide the payable after sales service, while stocks of spare parts for your model.

Contact details of guarantor:

ul. Kolejowa 14a 05-850 Ożarów Mazowiecki, Poland

tel/fax +48 22 863 64 33 e-mail: [email protected]

date of sale

Akurat Lighting Sp. z o.o.

signature and stamp

Made in Poland