air choice WTF-40 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Klimatyzator air choice WTF-40. air choice WTF-40 10 stron.

OPERATION & FUNTIONALITY

Take out the product from the carton.

Step 1: ASSEMBLING

1. First insert the snap of the base into the square hole.

2. Align the four fixing screw holes of the assembled base with the screw posts of the fuselage, lock t

he fuselage and the base with 4 self-tapping screws. At the same time, lock the two fixing screws of t

he base and put the product in the right direction.

STEP1

STEP2

Step 2: FILL THE WATER TANK

1. Pull out the water tank.

2. The icebox should be filled with water and frozen by a refrigerator before using it. To ensure the

cool effect, the frozen icebox is expected to be put into the water tank.

3. Fill the water tank with clean cold water. Make sure that the water level is between the "Min"

level and the "Max" level.

4. Close the water tank.

Attention!

1. Making sure the power is cut off before filling or refilling the water tank.

2. Fill only water into the water tank. Please do not add any chemicals, oils or other additives.

3. Fill only cold water into the water tank. Please do not try hot or warm water.

4. Make sure the water level in the water tank is between the "Min" level and the "Max" level.

Step 3: PANEL/REMOTE OPERATION

Place the unit on a firm level surface and then connect it to the power supply. The power indicator

light reminds that the product is in standby mode. Press the "

" button to turn it on.

1. Speed button

: Select 3 different fan speeds (Low/Middle/High) (the default setting is in

middle-speed).