Air Cleaning Equipment Horizon Titan XG90 Instrukcja instalacji i obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Osuszacz powietrza Air Cleaning Equipment Horizon Titan XG90. Air Cleaning Equipment Horizon Titan XG90 13 stron.

Drukuj stronę

•• While in unit mode, the dehumidiﬁer will use it's built-in humidity sensor. If using a re-

mote control, unit mode will allow you to remotely monitor the room conditions where the

dehumidiﬁer is located.

•6. Remote Indicator Light

••

When the remote indicator light is red, it illustrates the unit is remote mode.

•

• While in remote mode, the dehumidiﬁer will use the sensor on the remote control unit. In

this mode, the inlet and outlet of the dehumidiﬁer can be ducted

•

Remote Control Instructions

Titan Dehumidiﬁers can be controlled using an optional remote accessory. The Horizon Remote

Control connects to your Titan Series Dehumidiﬁer via a 25' CAT 5 cable. The remote control contains

an integrated sensor which gives you multiple options for remotely controlling your unit, in addition to

monitoring the conditions surrounding the dehumidiﬁer.

One application for the remote control is to install the dehumidiﬁer in one room with the condi-

tioned air ducted into a second room that contains the remote. For example, the dehumidiﬁer could be

installed in a laundry room and ducted into a living room. The remote would then be mounted in the liv-

ing room so the remote sensor can control the humidity and provide easy controls for the user.

Another useful application for the remote control is if the dehumidiﬁer is in area that's diﬃcult to

access on a regular basis. For instance, if your dehumidiﬁer is installed in your crawl space, the remote

could be mounted in your living space or garage. This provides you with an easy way to monitor the de-

humidiﬁer.

1. On/Oﬀ (Power)Button

Press the on/oﬀ button and the machine will start running (two

beeps). Press the button again to turn the machine oﬀ.

2. Up Button

/ Down Button

Use the Up and Down arrow buttons to adjust the humidity

level.

3. Mode

Use the Mode button to switch between dehumidiﬁcation and

a ducted application.

• The

symbol on the display board indicates the sen-

sor on the remote control is being utilized.

• The

symbol on the display board indicates the sensor on the dehumidiﬁer is being utilized.

4. Temperature

Press the temperature button to display the current temperature on the screen. Press the button again to turn oﬀ the dis-

play.

5. Continuous

Press this button to switch the unit into continuous mode.

6. Drain Pump

Use this button if the unit will not be in use for an extended period of time. Pressing the drain pump button will remove

water from the pump reservoir, so the unit can be safely moved or stored.

will appear on the display to indicate continuous mode.