Amerisolar Wolfram-BAT-5.12 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt sieciowy Amerisolar Wolfram-BAT-5.12. Amerisolar Wolfram-BAT-5.12 15 stron.

Worldwide Energy and Manufacturing USA Co., Limited

•The above list is for single use. If you need parallel use, please contact our company.

•The cables and wiring harnesses used for residential storage battery are not in the product

packaging box, and are configured separately according to the actual use of the user.

2.2 Transport Requirement

During transportation, the product must be placed vertically and properly to prevent strong

vibration, shock, puncture and heavy pressure during transportation.

If the product is not put into operation immediately, it needs to be stored under specific

environmental conditions. Amerisolar is not responsible for any failures caused by storage.

When storing, ensure that the power of the product is not less than 60%, the storage

environment temperature should not exceed 40°C, and the relative humidity should not

exceed 80%. At the same time, it should be kept away from flammable and explosive

materials, dust and metal powder, and acid or other corrosive gases.

The battery system should be stored in a place away from rain, humidity and sunlight.

This product is made of lithium iron phosphate battery, which have the characteristics of good

safety, long life, low internal resistance, and high charge and discharge efficiency. The

battery module is welded by laser welding process, and use FPC for voltage and temperature

sampling, and is connected to the BMS wiring harness through the terminal.

Battery Box

File

Table 3 identification definition

．

Be careful, risk of electric shock

Ignoring safety warnings or improper operation may cause

minor injuries or minor or moderate damage to equipment or

property

User Manual/Packing List