Astria ValiantOD36P2 Instrukcja instalacji i obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kominek zewnętrzny Astria ValiantOD36P2. Astria ValiantOD36P2 20 stron. Outdoor vent-free firebox
Drukuj stronęINSTALLING FIREPLACE HOOD AND SCREEN
1. For Indoor models, attach hood and front panel assembly by snapping
panel assembly into fireplace opening (see Figure 12).
2. For Indoor/outdoor models, loosen screws along the fireplace top
face. Remove two screws along fireplace face side. Slide hood
underneath screws on top and tighten screws. Replace screws on
side of fireplace face side securing hood to the face (see Figure
13).
3. Insert each screen rod through all rings located at top of screen.
4. Insert first rod into rear hole in left side of firebox. Fasten rod to
rear hole near center of firebox using #10 x 3/8" Phillips screw
provided (see Figure 14).
5. Insert other rod into front hole on right side of firebox and fasten
using remaining Phillips screw.
Hood
Figure 12 - Hood Placement
(Model May Vary From Illustration)
Hood
Remove/Replace
Side Screws
Figure 13 - Hood Placement
(Model May Vary From Illustration)
12
INSTALLATION Continued
Loosen Top
Screws
Astria.US.com
Top View of Rod Layout
Rear Hole
Front Hole
Rod
Ring
Screen
Figure 14 - Installing Fireplace Screen (Model May Vary From
Illustration)
Identification
Label
Location
Screw
126773-01B