Astro Machine AstroJet M1C Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Urządzenie do tworzenia etykiet Astro Machine AstroJet M1C. Astro Machine AstroJet M1C 6 stron.
Również dla Astro Machine AstroJet M1C: Skrócona instrukcja obsługi (2 strony)

Drukuj stronę
AstroJet

Quick Start Guide

Step 1
Remove Printer and
Accessories from packaging
Place Printer on a stable surface. Use
the Bubble Gauge mounted on the Print
Engine (or a small level) to make sure
the Printer is level.
Step 2
Remove Service Station Transport Tab and
Shipping Tape
1. Open Top Cover.
2. Open Print Engine Clamshell (2 latches).
CAUTION
HOLD ONTO BOTH LATCHES WHEN OPENING AND
CLOSING CLAMSHELL TO PREVENT DAMAGE.
DO NOT ALLOW CLAMSHELL TO DROP OR SLAM
CLOSED. A STOP LIMITS RAISING CLAMSHELL MORE
THAN 60°.
3. Remove
Transport Tab
Insert [A].
TM
M1C
Page 1
Step 3
Connect Power to Printer
1. Main Power Switch should be
turned OFF.
2. Power cord plugs into receptacle
[1]. (Located just below the power
switch.)
Connect Printer to Computer
USB cable from computer plugs into
the Printer's USB port [3].
Network port [2].
Unwinder Interconnect port [4].
(Located just below the USB port.)
DO NOT CONNECT USB CABLE OR
NETWORK CABLE YET.
DO NOT TURN PRINTER POWER
SWITCH YET.