Astro Tool 616336 Arkusz instrukcji - Strona 2

Przeglądaj online lub pobierz pdf Arkusz instrukcji dla Narzędzie do zaciskania Astro Tool 616336. Astro Tool 616336 2 stron. 8-step adjustable

Drukuj stronę

GAGING INSTRUCTIONS

Gaging the tool requires the M22520/3-03 Gage

Pin Assembly, Astro part # 616337.

1. Set the tool to selector setting # 8.

2. Close the handles to the fully closed position.

3. Holding the tool closed, insert the GO pin into

the indenter opening as shown, see figure # 1 The

gage must pass freely between the indenter tips.

4. Holding the tool closed, insert the NO GO pin

into the indenter opening. The gage pin must NOT

go between the indenter tips.

Figure # 1

CAUTION:

DO NOT CRIMP GAGE. TOOL DAMAGE

WILL RESULT.

Astro manufactures the ATK6004 gaging kit

with gage pin assemblies for each selector setting.

Contact the factory for price and availability.

ASTRO TOOL CORP. MANUFACTURERS OF INSERTION, REMOVAL,

CRIMP TOOLS AND CONNECTOR SERVICE KITS

ASTRO TOOL CORPORATION • 21615 S.W. T-V HWY. • BEAVERTON OREGON 97003

503-642-9853 • FAX 503-591-7766

GAGING INFORMATION

SELECTOR

SETTING

NUMBER

TOOL SERVICE

Astro Tool's 616336 Crimp Tool is designed for

long, reliable service. If the tool becomes

inoperative or does not gage properly, it is

suggested that you

Department for a Return Goods Authorization

number and return the tool to our factory. Please

note that Astro's Quality Control system is traceable

to The National Institute of Standards and

Technology (N.I.S.T.).

Upon receipt of the tool, Astro will inspect and

overhaul each tool to put the tool back into

acceptable and efficient operating condition. Worn

parts will be replaced or repaired.

Service charges for tools not under warranty will

be advised upon request.

Parts that Astro deems to have been damaged

due to neglect, misuse or accident; and parts that

have been altered or repaired by persons other than

Astro Tool Corp. employees will be replaced

subject to additional charge for such parts.

TOOL IS PERMANENTLY LUBRICATED AT

THE FACTORY,

NO GO

SIZE

± .0001

±.0001

.0160

.0210

.0190

.0240

.0220

.0270

.0250

.0300

.0290

.0340

.0330

.0380

.0370

.0420

.0410

.0460

contact our Customer Service

DO NOT OIL

4-5-15 TI336-12-4