DAH Solar DHM72 5BB Series Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Falownik DAH Solar DHM72 5BB Series. DAH Solar DHM72 5BB Series 10 stron. Pv module

P V

M O D U L E

I N S T A L L A T I O N

M A N U A L

1. Basic Information /

1.1 Summary

Firstly, thanks for choosing DAH Solar PV modules. In order to ensure the PV modules to be installed correctly and to have

power output stability, please read the following operation instructions carefully before installing and using. Please

remember that you are using a electricity generation product, in order to avoid any accident, it should adopt relative

security measures.

Make sure that the current and voltage values which generated a er the connection of the module are within the range of

the current and voltage values of the other devices connected to the PV array. The maximum permitted system voltage (DC)

of the modules is 1500V DC.

If installed on the roo op, modules must be installed on fireproofing material, please consult your local building depart-

ment to determine which roofing material to use.

PV module application class is A: Hazardous voltage (IEC 61730: higher than 50V DC. EN 61730: Higher than 120V), hazardous

power (higher than 240W), according to EN IEC61730-1 & -2 standards, the quality of PV modules can meet the safety

requirements and safety level II.

1.2 Application Products

This document is applicable to the series of DAH solar module as listed below:

DHP60-(XXX)-5BB DHM60-(XXX)-5BB

DHP72-(XXX)-5BB DHM72-(XXX)-5BB