Asus BE27ACSBK Series Podręcznik użytkownika - Strona 41
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Asus BE27ACSBK Series. Asus BE27ACSBK Series 43 stron.
Drukuj stronę
3.4
Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights amber and there is
no screen image
Screen image is too light or dark
Screen image bounces or a wave pattern is
present in the image
Screen image has color defects (white does
not look white)
Screen image is blurry or fuzzy
No sound or sound is low
ASUS BE27ACSBK Series LCD Monitor
Possible Solution
• Press the
button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the power switch is ON.
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
• Adjust the Contrast and Brightness
settings via OSD.
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
• Adjust the Phase and Clock settings via
OSD.
• Ensure that the HDMI/DisplayPort/USB
Type-C cable is properly connected to the
monitor and the computer.
• Adjust the volume settings of both your
monitor and HDMI/DisplayPort/USB
Type-C device.
• Ensure that the computer sound card
driver is properly installed and activated.
3-13