Baumer GXP8W Podręcznik - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik dla Konwerter mediów Baumer GXP8W. Baumer GXP8W 13 stron. Absolute encoder with devicenet
Drukuj stronę
9.2.3. Terminal significance
Pin
Terminal
1
DRAIN
2
UB
3
GND B
4
CAN_H
5
CAN_L
9.3. Display elements (status display)
A DUO LED (green/red) working in the 'Combined Module/Network Status' in line with the DeviceNet
specification is providing information on the status of the device respectively of the network.
LED-Colour
Status
off
not connected
Green flashing
Device is active and online
No connections established
Green continous Device is active and online
Connections are established
Red continous
Critical device error or
Critical communication error
Red flashing
Corrective error
Manual_GXP8W_EN.doc
04.05.11
Significance
Shield connection
Power supply 10...30 VDC
Ground connection UB
CAN Bus Signal (dominant High)
CAN Bus Signal (dominant Low)
Significance
No power supply
The device is operating under normal conditions and
is online, no connection established.
The device is operating under normal conditions and
is online, connection status "established"
The device is in fatal non-corrective error status
I/O connections in Time-Out status
13/13
- Dupl. MAC-ID check not terminated.
- No power supply
- Encoder not yet configurated by Master
- configuration incomplete or faulty
- no network communication possible
- double assignment of user address (MAC-ID)
Micro Connector
Pinout
Male (Pin)
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany