Baumer HUBNER BERLIN DeviceNet HMG 10 Instrukcja montażu i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Konwerter mediów Baumer HUBNER BERLIN DeviceNet HMG 10. Baumer HUBNER BERLIN DeviceNet HMG 10 36 stron. Absolute encoder with magnetic sensing

Drukuj stronę

)

2.2

Attention instructions for mounting and operation

Risk of destruction due to electrostatic charge

Electronic parts contained in the encoder are sensitive to high voltages�

» Do not touch plug contacts or electronic components�

» Protect output terminals against external voltages�

)

» Do not exceed max� operating voltage�

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces�

» Never restrict the freedom of movement of the encoder� The installation instruc-

tions must be followed�

)

» It is essential that the speciied clearances and/or angles are observed.

Risk of destruction due to mechanical shock

Violent shocks, e� g� due to hammer impacts, can lead to the destruction of the

sensing system�

» Never use force� Assembly is simple when correct procedure is followed�

)

» Use suitable puller for disassembly�

Risk of destruction due to contamination

Dirt penetrating inside the encoder can cause short circuits and damage the optical

sensing system�

» Absolute cleanliness must be maintained when carrying out any work on the open

terminal box�

)

» When dismantling, never allow lubricants to penetrate the encoder�

Risk of destruction due to adhesive luids

Adhesive luids can damage the optical sensing system and the bearings. Dismoun-

ting an encoder, secured to a shaft by adhesive may lead to the destruction of the

unit�

» Do not use adhesive luids for ixing.

MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN

SAFETy AND ATTENTION INSTRUCTIONS

4/33