Asus 90IG07M0-MO3C50 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router bezprzewodowy Asus 90IG07M0-MO3C50. Asus 90IG07M0-MO3C50 2 stron. Ax1800 dual band wifi router
Drukuj stronę
Quick
Start Guide
ASUS ZenWiFi XD4 Plus
AX1800 Dual Band WiFi Router
Model: XD4 Plus
Before Setup
Preparing to set up an AiMesh WiFi system
Find two ZenWiFi XD4 Plus, and power them on.
1
Use a network cable to connect your modem to the WAN port of either ZenWiFi XD4 Plus. This
2
ZenWiFi XD4 Plus will be the AiMesh router, and the other ZenWiFi XD4 Plus will be the AiMesh
node.
The LED turns solid blue to indicate that ZenWiFi XD4 Plus is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up and
manage your router(s).
AiMesh Setup Steps
01
Prepare
Place your AiMesh router and node in the same room and at
least 1 meter apart during the setup process.
02
AiMesh node
Keep your AiMesh node powered on and standby for AiMesh
system settings.
03
Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or synchronization
fails, please check the following and try again.
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.
a
Your AiMesh node is powered on.
b
Hardware Explanations
Plug the adapter into the DCIN port.
1
The power LED will light up when your hardware is ready.
2
XD4 Plus Overview
LAN port
DCIN port
WAN/LAN port
Specifications:
DC Power adapter
DC Output: +12V with max 1.5A current
Operating Temperature
0~40
C
Storage
o
Operating Humidity
50~90%
Storage
AiMesh node
AiMesh Setup Steps
At least
1 meter
AiMesh node
WAN/LAN port
Connect your modem to this port
with a network cable.
LAN port
Connect your PC to a LAN port
with a network cable.
0~70
C
o
20~90%
AiMesh router
AiMesh router