Follett HCD1650NBT Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kostkarka do lodu Follett HCD1650NBT. Follett HCD1650NBT 8 stron. With remote air-cooled condensing unit
Również dla Follett HCD1650NBT: Instrukcja instalacji (17 strony), Podręcznik (8 strony)
Drukuj stronę
Dimensional drawing
Specification
W1 Width
D1 Depth
H1 Height
Electrical single phase
Electrical three phase
Minimum circuit ampacity
Minimum overcurrent protection
Electrical
208‑230 V/60/3 ‑ three phase
Cooling unit operating limits
(air temperature)
Maximum refrigerant line run length
Maximum line rise above evaporator
Evaporator mounting above condenser
Maximum refrigeration line drop
BTU/hr (Kcal/hr) at
0 F (‑18 C) evaporator, 90 F (32 C) ambient air, 1650N units only)
Rack systems * EPR valve ‑ set to
Approximate ship weight
NOTE:
1. 1650 model condensing units have a liquid suction line heat exchanger. The entire liquid line should be insulated separately from
the suction line.
2. Outdoor installation of low side is not recommended and will void warranty.
* EPR valve to be supplied by installer.
Remote 1650 series ice machine
D1
W1
36.25" (92.0 cm) – all models
25.50" (64.8 cm) – all models
26.10" (66.3 cm) – all models
208‑230/60/1
208‑230/60/3
single phase 29.90 A
three phase 21.24 A
single phase 50 A
three phase 35 A
35 amps, requires dedicated
amp circuit, internal connection
min ‑20 F (‑29 C)
max 120 F (49 C)
100' (30.5 m)
35' (10.7 m)
15' (4.6 m)
15' (4.6 m)
13,000 (3,276)
0 F (‑18 C)
340 lb (154 kg)
H1
3
Form# 7040