Amplificazioni Lombardi LCOMP2 Podręcznik - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik dla Sprężarka Amplificazioni Lombardi LCOMP2. Amplificazioni Lombardi LCOMP2 13 stron.
Drukuj stronęA M P L I F I C A Z I O N I
technical specifications
input
input impedance
output
Output load
Max level input / output
equivalent input noise
maximum input level
gain
THD (harmonic distortion)
frequency response
attack time
release time
compression ratio
compression threshold
power supply
power transformer
dimensions
weight
in A:
XLR (Cannon) female parallel with 6.3 mm jack
- Balanced
in B:
XLR (Cannon) female parallel with 6.3 mm jack
- Balanced
47 Kohm - balanced input
25 Kohm - unbalanced input
out A:
XLR (Cannon) male parallel with 6.3 mm jack -
balanced of transformer output
out B:
XLR (Cannon) male parallel with 6.3 mm jack -
balanced of transformer output
150 ohm or higher
+ 20 dB
< -90dB (15.7 KHz of bandwidth)
depends on the selection of mic / line in the back
will have different levels:
- maximum range HIGH +20dB*
- maximum range LOW 0 dB*
(* 0dB = 0,775 V RMS)
depends on the selection of mic / line in the back
will have different levels:
- maximum range HIGH 40dB
- maximum range LOW 20 dB
<0,001% without the threshold
20 Hz - 20 KHz
1 to 10 ms Depending on the signal
100 to 1 ms by the time the period of limitation
2:1, 4:1, 8:1, 12:1, 20:1 selectable via front panel
switches
Adjustable front panel
ratio
2:1
4-8-12-20:1
(* 0dB = 0,775 V RMS)
internal switch for 115V / 220-240V
toroidal
2 RACK unit
7,2 Kg
low range
high range
-61dB*
-41dB*
-45 dB*
-25dB*
page 5 of 13