Amp’ed RF Technology BT-AP111 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Bezprzewodowy punkt dostępowy Amp’ed RF Technology BT-AP111. Amp’ed RF Technology BT-AP111 12 stron. Bluetooth to ethernet bridge
Również dla Amp’ed RF Technology BT-AP111: Podręcznik użytkownika (9 strony)
Drukuj stronę1) Static IP address
Some infrastructure situations have to use static addressing, such as when finding the Domain Name System (DNS)
host that will translate domain names to IP addresses. Static addresses are also convenient, but not absolutely
necessary, to locate servers inside an enterprise. An address obtained from a DNS server comes with a time to live,
or caching time, after which it should be looked up to confirm that it has not changed. Even static IP addresses do
change as a result of network administration.
2) Subnet settings
All computers that belong to a subnet are addressed with an identical common, most-significant bit-group in their IP
address, which is called their routing prefix.
3) Default gateway
A host uses a default gateway when an IP packet's destination address belongs to someplace outside the local
subnet. The default gateway address is usually an interface belonging to the LAN's border router.
NOTE: Clicking the "Update Settings" button will cause the settings to be saved.
The "General Configuration Settings" portion of the page allows modification of the "Module Name" and "UPnP port
number", "MAC Address Byte" and "Inactivity Timeout".
4)
UPnP port
UPnP is an extension of plug-and-play, a technology for dynamically attaching devices directly to a computer,
although UPnP is not directly related to the earlier plug-and-play technology. UPnP devices are "plug-and-play" in
that when connected to a network they automatically established working configurations with other devices.
You defined the UPnP port number as per your network management requirements.
In BT-AP 111 manufacturer assigned MAC address byte but you can change the MAC address byte as per your
requirements.
Inactivity timeout is related with the connection between client & server, if inactivity occurs 20 minutes long than it
causes timeout or connection refused.
NOTE: Clicking the "Update Settings" button will cause the settings to be saved.
The "Restore Factory Defaults" portion of the page allows restoring all of the options to their default states.
©2010 Amp'ed RF Technology
09/10/2010
1879 Lundy Ave, Suite 138, San Jose, CA 95131, USA
www.ampedrftech.com
Amp'ed RF Technology, Inc.
(phone) 408 213-9530
(fax) 408 213-9533
BT-AP 111 Datasheet
Page 11 o f 12