AMS AS5048 Eval-Kit Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria AMS AS5048 Eval-Kit. AMS AS5048 Eval-Kit 12 stron. 14-bit rotary position sensor with digital angle (interface) and pwm output
Również dla AMS AS5048 Eval-Kit: Instrukcja obsługi zestawu (16 strony), Instrukcja obsługi (10 strony)
Drukuj stronęUser Manual – AS5048-AB
1
General Description
The AS5048 is an easy to use 360° angle position sensor with a 14-bit high resolution output. To
measure the angle, only a simple two-pole magnet, rotating over the center of the chip, is required.
The magnet may be placed above or below the IC. This is shown in
Figure 1:
Magnetic Position Sensor AS5048 + Magnet
2
The AS5048 adapter board
The AS5048 adapter board is a simple circuit allowing test and evaluation of the AS5048 magnetic
position sensor quickly without building a test fixture or PCB.
2.1 Board description
The AS5048 Adapterboard is a simple circuit allowing test and evaluation of the AS5048 rotary
encoder quickly without building a test fixture or PCB.
The PCB can be attached to a microcontroller or to the AS5048- Demoboard as external device.
Figure 2:
AS5048 Adapterboard
www.ams.com
4 x 2.6mm
mounting holes
Revision 1.2 / 14.01.2014
Figure
1.
AS5048 magnetic
position sensor
Interface type
A: SPI
B: I2C
P1 connector
page 3/12