Advanced Elements AE2042 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Łódź Advanced Elements AE2042. Advanced Elements AE2042 13 stron. Accessory frame system

For this application you will need the following items from this package:

• 4 Mounting Grommets

• Application Glue

• Plastic Cutting Mat

• Both Mounting Templates

Additional Items you will need for proper installation:

• Exacto or Matte Knife with a new blade

• Fabric chalk or pencil

• Metal straight edge ruler

• Scotch Tape and Duct Tape

• 4 small sheets of cardboard approx. 5"x"5 in size

Your Accessory Frame should be in three parts (the main frame body,

and 2 detachable arms). Before starting, inflate your kayak so that you

can have it ready for positioning the Accessory Frame and for gluing the

Mounting Grommets into place.

Positioning the Mounting Grommets:

1. Slide two of the Mounting Grommets onto the main Frame Body and

position them so that they are just past the holes in the frame.

SEE IMAGE 1.

2. Slide one Mounting Grommet onto each of the Detachable Arms and

position them so that they are at the same end of the arm as the black

pole cap. SEE IMAGE 2.

Image 1

3. Once the Mounting Grommets are in place, attach the Frame Arms

to the Frame Body.

4. Place the assembled Accessory Frame (with the Mounting Grommets

in place) on a flat surface and rotate the Mounting Grommets so that

the disk portion of each grommet lays flat and even on the surface.

Continued on Next Page

Accessory Frame System Instruction Manual

Image 2