Electrolux EW 1478 F Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Electrolux EW 1478 F. Electrolux EW 1478 F 27 stron.
Drukuj stronę
13 START/PAUSE button
BAÇLAT/BEKLET
BASLAT
BEKLET
This button has three functions:
Start - Pause - Draining of water.
Start
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
Pause
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
Draining of water
By depressing the Start/Pause button
• The water of programme "A" (Soak) is emptied out
• The water of the last rinse on programmes with
Anti-crease option SUDA BEKLETME is emptied
out and the laundry is spun.
14 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the End
pilot light comes on.
ÖN YIKAMA
YIKAMA
DURULAMA
SUDA
BEKLETME
BOSALTMA
SIKMA
FILTRE IKAZ
PROGRAM
SONU
If the pilot light FILTRE IKAZ flashes at the end of the
programme this means that the drain filter must be
cleaned.
In the event of operating problems one of the
following lights starts to flash and an alarm code
appears on the display.
E10 + SUDA BEKLETME = the machine does not fill
E20 + DURULAMA = the machine does not empty
E40 + YIKAMA = the door has not been closed
To eliminate the problem, see paragraph "Something
not working".
Functions
Pilot lights
Depending on the programme, different functions
can be combined.
When the relevant buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot light
flashes for about 2 seconds and the message Err is
displayed.
13