ANDELI MCT-520DPL Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania ANDELI MCT-520DPL. ANDELI MCT-520DPL 20 stron. Multifuction welding&cutting machine
Również dla ANDELI MCT-520DPL: Instrukcja obsługi (8 strony)
Drukuj stronę
Welding and cutting is dangerous to the operator, people in or near the working area, and the
surrounding, if the machine is not correctly operated. Therefore, the performance of
welding/cutting must only be under the strict and comprehensive observance of all relevant
safety regulations.
installation and operation.
The switching of function modes is possibly
damaging to the machine, while the welding
operation is performed.
Do disconnect the electrode-holder cable with the
machine, before the performance of welding.
A safety switch is necessary to prevent the machine
from electric leakage.
Welding tools should be of high quality.
Operators should be qualified.
ELECTRIC SHOCK: IT COULD BE FATAL!
Connect the earth cable according to standard
regulation.
Avoid all contact with live electrical parts of the
welding circuit, electrodes and wires with bare
hands. It is necessary for the operator to wear dry
welding gloves while he performs the welding task.
The operator should keep the working piece
insulating from himself/herself.
SMOKE AND GAS GENERATED WHILE WELDING OR
CUTTING: HARMFUL TO PEOPLE'S HEALTH.
Avoid breathing the smoke and gas generated while
welding or cutting.
Keep the working area well ventilated.
FIRE HAZARD
The welding splash may cause fire, thus remove
flammable material away from the working place.
Have a fire extinguisher nearby and have a trained
person ready to use it.
Noise: possibly harmful to peoples' hearing.
Noise is generated while welding/cutting, wear
approved ear protection if noise level is high.
Machine fault:
Consult this instruction manual.
Contact your local dealer or supplier for further
advice.
WARNING !
Electric leakage protecting switch should be added when using the machine!!!
2. SAFETY WARNING
Please read and understand this instruction manual carefully before the
3