Andersen Hitches Ranch Hitch 3139 Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Andersen Hitches Ranch Hitch 3139. Andersen Hitches Ranch Hitch 3139 8 stron. Straight, 8” offset, 24,000 lbs gtwr - 6,000 lbs tongue
Drukuj stronę
IMPORTANT SAFETY INFORMATION
Read the entire manual before using the Ranch Hitch Adapter to tow.
Before each trip—and regularly during a trip—check all hardware, bolts and nuts for wear and fatigue, and make
sure that they are all properly tightened and secured in place.
The Ranch Hitch Adapter is NOT recommended for cushioned or movable pin boxes, only on static pin box
applications. If you have a cushioned pin box you may want to use our Ultimate 5th Wheel Connection fifth
wheel hitch instead.
As with any 5th wheel hitch, there is a point beyond which every trailer will contact the tow
vehicle. Each trailer is unique, so become familiar with your specific vehicle/trailer limitations.
Because Andersen Manufacturing has no control over your trailers' pin box and frame construction, we ask
you to use caution on your first towing experience with the Ranch Hitch Adapter. Be aware of what your
trailer is telling you. If you are feeling undue chucking, or if you feel significant surging when stopping or
starting, additional reinforcing gussets may need to be positioned in or on your pin box. A good welder will
be able to shore things up, and you will be safely on your way. If you are unsure, please feel free to call us.
PARTS ILLUSTRATION – Ranch Hitch Adapter
Straight Adapter - Part #3100
7
1
2
3
4
1. Threaded Collar Assembly (one threaded collar and
two split collar halves) #3110
2. Ranch Hitch Adapter Base #3102
3. Set Bolts (2 pcs) #3107
4. Ranch Hitch Stinger (straight or 8" offset) #3101 or #3140
5. Remote Cable Latch and Bracket #3112
6. Self Tapping Screws (2 pcs) #3107
7. 3/4" Grade 8 Bolts with washers and nuts (4 sets) #3107
8. Safety Brake Cable Kit (quick release snap, two 1/4" flat washers,
two 1/4" nuts, 1 eye bolt) #3107
9. Spanner Wrench #3104
10. Slide Hammer (optional install tool, not included in kit) #3103
8
Installation Tools
9
6
5
10
Sold Separately
3/4" Crowfoot Socket or Socket Adapter for set bolts
Torque Wrench capable of at least 180 ft- lbs of torque
8" Offset Adapter - Part #3139
7
1
2
3
4
Tools Needed for Installation
Anti-Seize Grease
Spanner Wrench (included)
Slide Hammer or Gear Puller
"Cheater Pipe" (1.25" IM, less than 4' long)
Electric Drill with 9/16" drill bit
3/4" Socket for grade 8 bolts
5/16" Socket for self-tapping screws
8
6
5