Andersen Sterilizers Anprolene AN75i Instrukcje instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Sprzęt laboratoryjny Andersen Sterilizers Anprolene AN75i. Andersen Sterilizers Anprolene AN75i 2 stron. Installation options

Drukuj stronę

Andersen Sterilizers Anprolene AN75i Instrukcje instalacji

Alternate Option 2

Alternate Option 3

The through wall mounting kit can also be

used as a ceiling mount to allow eve or

soffit termination. Straight quick

disconnect fittings and vent screens are

available from Andersen.

* Please note:

AAMI guidelines recommend all EO sterilizers be vented through a dedicated exhaust line to the outside atmosphere directly or through

an emission control system. The vent should not terminate within 25 feet of any building air intake source or near pedestrian or animal traffic, nor should

it allow EO release into or to reenter the building.

For further installation assistance please call your Andersen representative or 1.800.523.1276

Health Science Park • 3202 Caroline Drive

Haw River, NC 27258-9564 USA

800.523.1276

Remote location installation

Quick

release

The ¾" (1.9cm) I.D. braided tubing may be up

connector

to 200' (60.96m) in length allowing for sterilizer

placement in remote locations. (Choose a path

that will provide exhaust tubing protection from

obstruction or damage.)

Note: Installation in plenum designated areas

require use of plenum rated materials.

Soffit or eve termination

sterility.com

Join Us: Follow, Like, Share

MADE WITH PRIDE

IN THE USA

Installation Guidelines

Straight

quick release

connector

Exterior*

Wall

Exterior*

Roof

Hose

Vent screen

(optional)

REGISTERED

#3004634710

Distributed in Europe by: H.W. Andersen SARL

Distributed in UK, Australia, Africa & Middle East by:

H.W. Andersen Products, Ltd.

anderseneurope.com