Dreamline ENIGMA SHDR-60727912 Series Instrukcja instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Produkt hydrauliczny Dreamline ENIGMA SHDR-60727912 Series. Dreamline ENIGMA SHDR-60727912 Series 17 stron. Shower door

Drukuj stronę

13. Place the Guide block (#12) on the

floor and parallel it to the Stationary

glass (#02). It should not pass

beyond the vertical edge of the glass.

Take a measurement to ensure the

distance between the front line of

the glass and the center line of the

Guide block (#12) is 2-3/16". (Fig

15.1)

Hold it firmly and mark the drilling

hole on the floor. Remove the Guide

block (#12) and drill the hole in the

floor using Ø 5/16" drill bit, insert

the Small anchor Ø5/16" (#18) and

then fasten the Guide block (#12) to

the floor with the Countersunk

screw ST4.2×30 (#16).

See Fig. 15 for details.

14. Attach two top Rollers (#04) to the

Glass door (#05).

Suspend the door by hanging the Rollers

(#04) onto the Upper guide rail (#03)

and slide the bottom edge of the Glass

door (#05) into the groove of the Guide

block (#12).

Then mount two lower Rollers (#04)

onto the Glass door (#05) to secure the

Glass door to the Upper guide rail

(#03).

See Fig. 16 for details.

"Enigma" Ver.4 Rev.5 02/2016

2 3/16"

Fig. 15

Fig. 16

Ø 5/16"