Dreamline ENIGMA-Z SHDR-62487610 Series Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Produkt hydrauliczny Dreamline ENIGMA-Z SHDR-62487610 Series. Dreamline ENIGMA-Z SHDR-62487610 Series 20 stron. Shower door & tub door

Drukuj stronę

12 .

Place the Stationary glass (#02) with the Upper Guide Rail (#03) onto the threshold with the

notch fitting into the

note that the Stationary Glass (#02) installs on the outside and the Upper guide rail (#03) goes on

the inside of the shower).

The Guide Block (#12) must be

installed squarely on the threshold

and stationary panel glass

90°

13.

Re-position the Stationary glass (#02) and Upper Guide rail (#03) onto the threshold and

fasten both sleeves of the Guide rail brackets (#08) to the brackets on the walls.

Tighten the set screws on the Guide rail brackets (#08) to secure the Upper guide rail (#03).

Position the bracket set screws so that they are accessible from the top and bottom.

(Fig 14.1 & 14.2)

Assemble the Wall bracket (#19) at the bottom corner of the Stationary glass (#02). Use the clear

vinyl gasket between the glass and the metal parts to avoid contact with the glass, then tighten the

bolt with the supplied allen wrench.

ENIGMA-Z manual Ver 1 Rev 4 10/2016

Guide block (#12).

overhead view of

guide block and

stationary panel glass

90°

on threshold

Position the Stationary glass (#02) against the wall. (Please

Use Caution

Fig. 14

See Fig. 13 for details

Fig. 13

See Fig. 14 for details

outside

Painter's Tape