DREAMS FRANCIS OTTOMAN BEDGAS LIFT Instrukcja montażu - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz DREAMS FRANCIS OTTOMAN BEDGAS LIFT. DREAMS FRANCIS OTTOMAN BEDGAS LIFT 9 stron.
Fittings Checklist
Code
Description
Bolts (M8x30mm) for
A
fitting side rails (3&4) to
h
e
a
d
b
o
a
d r
&
o f
o
b t
o
B
Spring Washers (for M8 bolts)
C
Flat Washers (for M8 bolts)
HARDWARE FOR FITTING MATTRESS BASE BOARDS (PACK B)
Code
Description
Bolts (M8x30mm) for fitting
gas-lift mechanism and metal
A
(J) to
connecting plates
mattress base boards (5&6).
B
Spring Washers (for M8 bolts)
C
Flat Washers (for M8 bolts)
Domed nuts (M8) for fitting mattress
base lifting handle (11) to mattress
E
base board (6).
Additional Tools Required
No Additional Tools Required
General Hints & Tips
Please retain your assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
A ssembly requires two persons.
1.5 Hrs
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
a
d r
(1&2)
Approximate time to
assemble this product
Qty
Code
Description
D
Allen Key (for M8 bolt)
x16
Bolts (M8x60mm) for
fitting feet (12&13) to
x16
h
e
a
d
b
o
H
fitting mattress base support rail (9) to
headboard & footboard (1&2)
x24
Qty
Code
Description
x16
F
Spanner (for M8 nuts)
Flange Lock-Nuts (M8)
G
x8
for gas-lift pistons.
Metal Plates for connecting
J
x18
mattress base boards (5&6)
x2
In the unlikely event of missing or damaged parts, please
contact the customer service team on 0344 292 00 00.
When calling this number, please quote the part code
reference numbers shown in this leaflet when
requesting spare or replacement parts.
Intersecting
Hole
Page 2 of 9
a
d r
&
o f
o
b t
o
a
d r
(1&2)
Care & Maintenance
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
We recommend the bed is
assembled in the room it shall be
located in.
Qty
x1
x8
Qty
x1
x2
x2