Andover Controls EMX34/CK34 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy Andover Controls EMX34/CK34. Andover Controls EMX34/CK34 12 stron. Cardkey interface board
Drukuj stronęPowering Up the EMX34
1. Be sure the 24 VAC power source is wired properly; be sure all three wires are
connected.
2. Turn on the AC power source (or close the connection) and the interface starts
automatically.
Troubleshooting
For information on how to assign point numbers and program the outputs, see the SX 8000
Programmer's Guide or the Andover Controls Infinity CX Programmer's Guide.
If you have problems with the Infinet controller after installing the module, see the ACX 700
or 780 Installation Guide, and the Infinity Network Configuration Guide.
Technical Manuals Online! - http://www.tech-man.com
EMX 34 Installation Guide
11