Andrew Type 183 Instrukcja montażu - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Antena Andrew Type 183. Andrew Type 183 20 stron. 1.8 meter transmit receive antenna system

MAINTENANCE

To ensure that the transmit/receive mount and 1.8 m SMC Offset Antenna is operating efficiently and at an optimum,

moderate maintenance is required. We recommend conducting as routine maintenance inspection every six months or as

needed, if unusual circumstances occur, such as severe weather conditions, falling objects and vandalism.

The following checklist is provided for your convenience.

MAINTENANCE INSPECTION CHECKLIST

1 FOUNDATION

Structural Damage

2 TRANSMIT RECEIVE MOUNT

All bolts (if any loosening has occurred tighten and torque - refer to Torque Chart Page 3)

Structural Damage

Corrosion of galvanized steel members (if necessary, repair with cold zinc-rich galvanizing paint)

3 1.8 METER SMC OFFSET ANTENNA

Bolts - M12 round head square neck, securing antenna to mount (Correct torque 27 N-m/20 ft-lb)

Structural Damage

4 BOTTOM FEED SUPPORT TUBE, SIDE FEED SUPPORT STRUTS AND ORU BRACKET

All bolts (if loosening has occurred tighten and torque - refer to Torque Chart on Page 3).

Structural Damage

Corrosion of galvanized steel members (if necessary, repair with cold zinc-rich galvanizing paint)

5 FEED ASSEMBLY

All securing hardware

Structural Damage

Feed Horn Weather Cover - Physical Damage (if damaged, replace to prevent entry of water)

Upon inspection, make necessary repairs and replace any damaged parts. For replacement parts, contact

ANDREW CORPORATION at the address located on the front of this manual.