Electrolux DXK5500 Podręcznik użytkownika - Strona 30
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Okap wentylacyjny Electrolux DXK5500. Electrolux DXK5500 36 stron.
Exhausting mode
● Fit the coupling flange with non-return smoke
valve so that point B of the flange matches up
with the small triangle A which is printed on the
body of the appliance (Fig. 8).
● Connect the air outlet to the smoke exhaust hose
● Check that lever G is positioned on setting "A"
(Fig. 9).
● Refit the suction grid.
Attention! In the horizontal runs the duct must be
slightly slanted (about 10°) and directed upwards
to vent the air easily from the room to the outside.
The hood cannot be connected toflues
of other appliances that run on
energysources other than electricity.
Please, keep to the provisions of official directives
regarding the question of fumes discharge.
Recirculation mode (with carbon
filter)
The air is filtered through a carbon filter and
recirculated into the room through the front grid.
● Open the suction grid
● Turn lever G to setting "F" (Fig. 9).
● Fit the carbon filter as a cover of the inlet grid
of the fan motor (the carbon filter has a side
"cutted", this side must match the external side
of the hood - see Fig. 10), to fix the carbon filter
turn clockwise the central handle E (Fig. 10 -
turn about 90°) .
● Refit the suction grid.
This version is used when there is no exhaust duct
for venting outdoors or when it is impossible to
install one.
Fig. 8
Exhausting
Abluft
Evacuation
Aspirante
F
A
G
G
Fig. 9
Fig. 10
30
Recirculation
Umluft
Reciclage
Filtrante
F
A
G
F
A
G
90°
G
F
A