Electrolux EFA9620 Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Okap wentylacyjny Electrolux EFA9620. Electrolux EFA9620 18 stron.

Drukuj stronę

Connection in Ducting Version

When installing the ducting version,

connect the hood to the chimney using

either a ﬂ exible or rigid pipe ø 150 or

120 mm, the choice of which is left to

the installer.

• To install a ø 120 mm air exhaust con-

nection, insert the reducer ﬂ ange 9 on

the hood body outlet.

• Fix the pipe using the pipe clamps 25

provided.

• Remove charcoal ﬁ lters, if present.

Connection in Recycling Version

• Fix the connection 15 to the frame

using the 4 screws provided.

• Fix the ﬂ ange 10 to the lower opening

of the connection 15.

• Connect the hood air outlet to the

ﬂ ange in the lower part of the junction

using a rigid or ﬂ exible ø 150 tube (by

installer's choice).

• Ensure that the charcoal ﬁ lters have

been ﬁ tted.

Chimney assembly / Mounting

the hood body

• Position the upper chimney section

and ﬁ x the upper part to the frame

using the 2 screws 12c (2,9 x 6,5)

provided.

• Similarly, position the lower chimney

section and ﬁ x the lower part to the

frame using the 2 screws 12c (2,9 x

6,5) provided.

Before ﬁ xing the hood body to the fra-

me:

• Remove the grease ﬁ lters from the

hood body.

• Remove charcoal ﬁ lters, if present.

• From below, use the 4 screws 12f

(M6 x 10)provided to ﬁ x the hood

body to the frame.

Installation

ø 150

12c

12f

electrolux 11

ø 120