Atlas Donaire Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Atlas Donaire. Atlas Donaire 13 stron. 52” ceiling fan

Drukuj stronę

1. Operating the Remote Control

3. SAFETY RULES

1. To reduce the risk of electric shock, insure

electricity has been turned off at the circuit

breaker or fuse box before beginning.

All wiring must be in accordance with the

National Electrical Code and local electrical

codes. Electrical installation should be

performed by a qualified licensed electrician.

WARNING: To reduce the risk of electrical

shock and fire, do not use this fan with any

solid-state fan speed control device.

WARNING: To Reduce The Risk Of Fire,

Electric Shock, Or Personal Injury, Mount To

Outlet Box Marked Acceptable for Fan

Support of 15.9 kg (35 lbs) or less And Use

Mounting Screws Provided With The Outlet

Box. Most outlet boxes commonly used for

the support of lighting fixtures are not

acceptable for fan support and may need to

be replaced, consult a qualified electrician if in

doubt.

5. The fan must be mounted with a minimum of 7

feet clearance from the trailing edge of the

blades to the floor.

To operate the reverse function on this fan,

press the reverse button while the fan is

running.

7. Avoid placing objects in the path of the blades.

8. To avoid personal injury or damage to the fan

and other items, be cautious when working

around or cleaning the fan.

9. Do not use water or detergents when cleaning

the fan or fan blades. A dry dust cloth or lightly

dampened cloth will be suitable for most

cleaning.

10. After marking electrical connections, spliced

conductors should be turned upward and

pushed carefully up into outlet box. The

wires should be spread apart with the

grounded conductor and the equipment

-grounding conductor on one side of the

outlet box.

11. Electrical diagrams are reference only. Light

kit that are not packed with the fan must be

UL Listed and marked suitable for use with

the model fan you are installing. Switches

must be UL General Use Switches. Refer to

the Instructions packaged with the light kits

and switches for proper assembly.

TO REDUCE THE RISK OF PERSONAL

INJURY, DO NOT BEND THE BLADE

BRACKETS (ALSO REFERRED TO AS

FLANGES) DURING ASSEMBLY OR AFTER

INSTALLATION. DO NOT INSERT OBJECTS IN

THE PATH OF THE BLADES.

SUITABLE FOR USE IN WET LOCATIONS!

WARNING

NOTE