Bose Acoustimass Bass System Instrukcja obsługi - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Bose Acoustimass Bass System. Bose Acoustimass Bass System 24 stron. Wireless bass module
Również dla Bose Acoustimass Bass System: Instrukcja obsługi (18 strony), Instrukcja obsługi (11 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
T R O U B L E S H O O T I N G
Unable to complete
ADAPTiQ
Listen to the voice prompts for the following error messages:
Error
Problem
message
1
The microphone on the
ADAPTiQ headset cannot
detect sound.
2
The room is too loud.
3
The ADAPTiQ headset is
too close to the speakers.
4
The listening locations are
too similar.
5
The ADAPTiQ headset
cannot take measurements
due to movement.
After correcting your problem, you must re-run ADAPTiQ audio calibration
(see page 12).
If you hear a different error message, contact Bose customer service for further
instructions.
2 0 - E N G L I S H
audio calibration
®
What to do
• Secure all cables.
• Disconnect the ADAPTiQ headset cable and
reconnect it firmly into the soundbar's ADAPTiQ
connector.
• Ensure the microphone opening on the top of
ADAPTiQ headset is not blocked.
• Your ADAPTiQ headset may be damaged. Call
Bose customer service for replacement parts.
Re-run ADAPTiQ audio calibration when the room
is quiet.
Move the ADAPTiQ headset farther away from the
speakers.
Move 1 – 2 ft. (.3 – .6 m) away from your previous
listening location.
Hold your head still.