Bose Panaray 502A Instrukcja instalacji - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Głośniki Bose Panaray 502A. Bose Panaray 502A 24 stron. Full-range-driver array loudspeakers
Również dla Bose Panaray 502A: Informacje techniczne (4 strony), Instrukcja instalacji (12 strony), Podręcznik (4 strony), Instrukcja instalacji (32 strony)
Drukuj stronę
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Panaray ® 802 ® Series IV Loudspeaker U-Bracket
- 3. Panaray ® 802 ® Series IV Loudspeaker Mounting Options
- 4. Installation
- 5. Recommended Power Amplifiers
- 6. Recommended Dsp Settings
- 7. Panaray 802 Series IV Loudspeaker Specifications
- 8. Panaray 502 a Series Loudspeaker Specifications
Installation
Attach the bracket to the wall. Follow the instructions provided with the wall bracket.
2.
Choose a position and mounting method consistent with local building codes and regulations. Ensure the mounting
surface and the method of attaching the loudspeaker to the surface is structurally capable of supporting the weight of the
loudspeaker (7.3 kg (16 lb)). A 10:1 safety weight ratio is recommended.
Using the included T3 square drive, remove the plastic inserts on the rear panel of the loudspeaker and attach the
3.
bracket to loudspeaker using only the included M8 x 20 mm screws.
Hang the loudspeaker on the wall-mounted half of the bracket and install the lower carriage bolt removed earlier.
4.
12
M8 x 20 mm
13.6 – 16.3 Nm (10 – 12 ft-lb)
pro.Bose.com