Atlas Copco PHD 38 Instrukcje naprawy - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje naprawy dla Wiertarka Atlas Copco PHD 38. Atlas Copco PHD 38 8 stron.

Dismantling the

Remove the pillow block (4) of the

cylinder sleeve

reduction gear shaft as well as the sleeve.

Only applicable for "D"-models:

Completely remove the switch lever (1)

and the selector shaft (2). Disassemble

the selector shaft.

Loosen the Allan screws (5). Lightly hit the

gear case with a plastic hammer. Remove

the cylinder sleeve together with the

percussion body (3). Pull the percussion

body from the cylinder sleeve.

Dismantling the

Remove the screws and completely

reduction gear

remove the reduction gear shaft together

shaft

with the coupling, the distance sleeve (1)

and the holding ring (2).

Press the locking ring from the reduction

gear shaft with aid of a special tool and

dismantle the reduction gear shaft.

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

PAGE