Atlas Copco PHE 3X Instrukcja naprawy - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja naprawy dla Wiertarka Atlas Copco PHE 3X. Atlas Copco PHE 3X 14 stron.

Removing the

1 Remove the locking ring (1).

angle drive

2 Remove the angle drive (3) together with

the washers (2) and the support ring (4).

(If necessary by hitting the gear housing

lightly with a plastic hammer.)

bearing the tool can be equipped with

two or three washers (2). Note the

numbers of the washers and mount the

same number when re-assembling.

Removing the

1 Loosen the four screws and remove the

motor cover

motor cover (2).

2 Remove the rubber cap (1).

of manufacture 01/97).

Dismantling the

1 Expel the pin (8).

handle

2 Remove the field supply cables (9) from

the contacts and pull them from the field

housing.

3 Unscrew the handle cover (6).

4 Remove the silicone buffer (7).

5 Remove the locking ring

and the washer (1).

6 Remove the

AVS-rubber (2).

7 Remove the

handle (3).

8 Unscrew the

handle bolt (4).

Depending on the tolerance of the

The rubber cap (1) is glued in (from date

Repair Instruction No. 175.8/95

PHE 3, PHE 3X

3 4

PAGE

1 4