Atlas Copco PHE 6 S Instrukcje naprawy - Strona 12

Przeglądaj online lub pobierz pdf Instrukcje naprawy dla Wiertarka Atlas Copco PHE 6 S. Atlas Copco PHE 6 S 18 stron.

Mounting the

Insert the O-ring (6) into the gear hous-

crankshaft

ing (C).

Press the ball bearing (4) onto the crank-

shaft (5).

Insert the crankshaft (5) into the gear

housing from below (C) and fit it to the

connecting rod bearing.

Mount the spring ring (3).

Insert the key (D) into the crankshaft (5).

Fit the crank wheel (2) with the collar fac-

ing the eccentric and press it on.

Secure the crank wheel (2) with the spring

ring (1).

If necessary, mount the welch plug (7).

Fill the gear housing (C) through the serv-

ice opening with grease according to the

lubrication chart.

Fit the service cover (8) with gasket (B)

and valve (9) and fasten it with the

screws (A).

Steady the crankshaft with a suitable

mandrel which is pushed through the

opening in the cover (otherwise the

crankshaft is pushed in too far).

Repair Instructions No.181.03/98

PHE 6 H / PHE 6 S

PAGE