Bose ShowMatch DeltaQ SMAFT Instrukcje instalacji i bezpieczeństwa - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje instalacji i bezpieczeństwa dla System głośników Bose ShowMatch DeltaQ SMAFT. Bose ShowMatch DeltaQ SMAFT 13 stron. Array rigging frames

Drukuj stronę

pro.Bose.com

Product Applications

Bose® ShowMatch

array frames and rigging accessories are designed for use with ShowMatch DeltaQ

Array loudspeakers (SM5, SM10, and SM20) and ShowMatch DeltaQ Array subwoofers (SMS118).

Not for use with non-ShowMatch loudspeakers.

Array Frame

Use the ShowMatch Array Frame (SMAF) to create overhead

suspended arrays that contain subwoofer modules, or to create

ground stack arrays that use any combination of subwoofer

modules, mid/high modules, or both.

T-Bar Array Frame

Use the ShowMatch T-Bar Array Frame (SMAFT) to create overhead

suspended arrays that contain mid/high modules only.

Do not use the T-bar Array Frame with arrays that contain subwoofer

modules or to create ground stack arrays.

Array Pullback Bracket

Connect the ShowMatch Array Pullback Bracket (SMPULL) to the

bottom full-range array module to provide third-point suspension

to building structure. This allows more extreme downward angle of

arrays than possible from 2-point, gravity-hang suspension.

Additional Product Information

For more information and complete installation instructions for ShowMatch DeltaQ loudspeaker modules

and compatible accessories, refer to the installation guide available at pro.Bose.com. To request a printed

copy, use the phone numbers provided in the Contact Information section of this guide.

Manufacturer Declaration

We hereby declare that the ShowMatch DeltaQ Array loudspeakers and accessories have been designed

and built in compliance with BGV C1 standards and technical specifications. This declaration shall cease to

be valid if alterations are made to the equipment without our prior agreement.

Installation Guide - ShowMatch

Introduction

DeltaQ

Array Rigging Frames - 3